1 / 2
TI4 Warp Zones Hyper Lanes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created some simple Hyperlane Or Warp Zone spacers for TI4. These are used to keep the hex count per player…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 520
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
I created some simple Hyperlane Or Warp Zone spacers for TI4. These are used to keep the hex count per player consistent with a 6 player game. Works for 3, 4, or 5 players. You just have to print one set for each player less than 6.
Print Settings
Printer:
Ender 3
Rafts:
No
No
Resolution:
1mm
N/A
Filament: Sunlu PLA+ White
Notes:
I suggest printing something so flat and short with the fattest nozzle your printer will take.
I made the raised sections with a filament swap in mind, but then realized I would have to swap the filament 5-6 times per set. Being lazy I decided white filament and a sharpie would do, and they did just fine.Category: Toy & Game Accessories