Tiltable VESA mount - 100x100
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Useful rotating and tilting holder for TVs or monitors. VESA 100x100.
- Ocena
- 5 / 5
- Polubienia
- 145
- Pobrania
- 701
- Wydruki
- 3
- Wyświetlenia
- 2800
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A handy holder for TVs or monitors that allows rotation and tilting. Suitable for your office, workshop or public areas for information monitors.
This holder is sturdy even if you print it with PLA (also in my case) and comes with VESA 100x100 plate. (note that there is also VESA 75x75 version here: https://www.printables.com/model/1034140-tiltable-vesa-mount-75x75 ).
Introducing video:
Printing:
All parts are printed easily without supports. I used 4 perimeters to make sure it will hold the weight.
For printing orientation please refer to 3mf file.
Installation:
For installation you will need screws for wall mounting (4mm or 4.5mm in diameter) and bolts (M4x10mm) for fixing the monitor to VESA plate.
Notice:
This is a 3D printable model with which I try to get closer to the classic brackets that are normally made of metal. I don't think you have to worry if the print is set correctly and the printer and filament are in good condition.
Of course, it's up to you if you go for it. There are certainly better materials than PLA (PETG, ASA, PC Blend etc), but my holder printed from PLA holds up well. Just to be sure, I'll check it from time to time for any cracks.