1 / 5
BrickHeadz Hexagon Shelf Display
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display your LEGO BrickHeadz in style with this Hexagon display model.
- Ocena
- 5 / 5
- Polubienia
- 83
- Pobrania
- 426
- Wydruki
- 2
- Wyświetlenia
- 1651
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (96)Powiązane
Inspired by the model from SaphyreKry
I didn't like how the edges were so bulky and I wanted a better fit. So I designed them all from scratch to fit my needs.
These fit most models except for 40631 Balrog as it is too big. I am working on a specific version of the hexagon that will fit it.
There are 4 variants. I recommend printing a mix of them depending on what you want to do.
- Closed_Back_Hang: includes slot for a screw, you can use 2 or 3 of these, and it should hold everything else.
- Open_Back: just the hexagon itself
- Open_Back_Border: the hexagon with a small border around it on the inside. Useful if you want to use some double-sided tape to stick these to a wall or other surfaces.
- Closed_Back: fully closed back if you don't want the wall behind to be visible.