BeamCase ATX Front IO (USB-C+3.0)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front IO for the Beamcase ATX. Replaces the 180mm Top-Bar. 2x USB 3.0 + 1 x USB-C
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 572
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This tiny modification allows you to add Front-IO to your Beamcase ATX. Ive included Magnets to be able to have a cover to hide the IO if you dont want it visible at all times.
The Mod also comes with an attached bracket to screw to one of the top beams to counter rotation of said beam (1x 8mm Screw needed).
All you need is the USB-Ports, Screws.
BOM:
- USB 3.0: https://www.amazon.de/dp/B09J154FQN?ref=ppx_yo2ov_dt_b_fed_asin_title
- USB-C: https://www.amazon.de/dp/B083FS48N9?ref=ppx_yo2ov_dt_b_product_details&th=1
- Magnets: 4x 8x2mm
- Screws: 5x 16mm, 1x 8mm - the same you used for the case.
- Nuts: 2x M3 Nuts, (tried with hex), inserted into the rubber of the USB-C port.
(i dont think these are affiliate links, but let me know if they are)
Printing:
I printed this in ABS, 4 Walls, ~35% Infill. You might need to scale the parts up a bit, usually aroung 0.5-0.7% works for me.
I havent tried PETG, it should work, however i would not print the parts in PLA.
The parts are already oriented the right way and do not need Supports.
Assembly:
When assembling be careful not to strip the 3 Screws holding the 3.0 ports in, because those simply go into the plastic.
Panels:
Check out my 360mm Panels, which feature a new front cover that allows easy access to the ports.