Belt Sander Cradle ( Ryobi BE319 )
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drop in brace to hold your belt sander upside down on your work bench.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 248
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This brace is designed to hold a Ryobj BE319 belt sander belt side up on your work bench leaving your hands free to hold the piece being sanded. The brace can be held to the workbench with clamps for added stability. The sander rests in the brace pretty snugly and there is room to get to the device power switches.
Eventually I'd like to add a new version of this model that allows you to mount the sander on its side on the workbench in addition to upside down.
Disclaimer:
Use this device at your own risk. I would guess that running the belt sander upside down is not a recommended way to use the tool and could be dangerous. Always wear proper safety gear and be careful.
Print settings:
Filament: PLA
Infill: 15%
Layer height: .25mm
Supports: No
Brim: No