Vax Carpet Washer V-125 - Cord/Hose Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VAX Carpet Washer All Terrain V-125 original product: http://www.vax.co.uk/all-terrain-carpet-cleaner-and-washer The…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
VAX Carpet Washer All Terrain V-125
original product: http://www.vax.co.uk/all-terrain-carpet-cleaner-and-washer
The original hook broke, so created a replacement. Design very similar to the original, was manually drawn, measurements were taken using a digital calliper and ruler. Designed in Fusion360, STL exported and sliced in Simplify3D 3.1. Printed on a BigBox Dual Hybrid V1.1
Wasn’t too fused with finished look, so 0.3mm layer height with a 0.4 nozzle was used, 15% fast honeycomb infill.
No post production, apart from cleaning a bit of stringing between the two tabs with a craft knife.
Fitted to the cleaner with no issue, and been used
Print Settings
Printer:
BigBox Dual v1.1
Rafts:
No
Yes
Resolution:
0.3
15%
Notes:
Printed in the default orientation it appears when loaded in the slicer, as shown here.
nozzle 0.4layer 0.3
no raft
support used at bottom
Simplify3D Used to slice
How I Designed This
Copy of the original using a ruler/digital caliper
Category: Replacement Parts