1 / 5
Сutlery dryer / box / holder with hinge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I added a wide hook at the back to hang the dryer on a rod up to 10-12mm thick. With a narrow hook it is less stable.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed it using cheap natural white PLA with 3 walls and 15% cubic infill. It worked out quite sturdy. Supports are needed only for the hook region.
With a narrow hook it is unstable, so I made a version with a wider hook and recommend printing it. But in the photos there is a dryer with a narrow hook, it can also be used, although not as conveniently.
The dryer is also available as FreeCAD (0.21.2) source file should you require modifications.