Adjustable Pipe Clamp Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used the model created by @SqueakyRobot and modified it a bit to be able to use it as a mount. Also made it more robust.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 220
- Wydruki
- 1
- Wyświetlenia
- 1577
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a way to mount an object to two pipes that would allow for easy adjustment of the height of either side. The model created by SqueakyRobot was close to what i had envisioned so I modified it for my use case in fusion 360 by adding a mounting bracket (for lack of a better term) and by making the whole body significantly thicker. The pipes I use it on are 30 mm and this holds quite well. Was able to print in place easily on my Ender 3 S1 Pro which took about 3 hours using ASA and .4 mm nozzle with a .25 mm layer height with 4 walls and 90% infill. I also printed one not in place so either way works just as well.