3D Scanning Marker Target Tree
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D scan marker but its a tree now
- Ocena
- 5 / 5
- Polubienia
- 106
- Pobrania
- 828
- Wydruki
- 2
- Wyświetlenia
- 2959
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This marker tree holds up to four marker and makes for easy to recognize features for your scanner. It comes in two versions. One with magnet and one with a threaded base. It is intended to be used with 4x2mm round magnets
Printing:
Just print in the given orientation
Assembly:
Put the magnets in place and use a drop of superglue if needed
If you are looking for other shapes, marker or additional 3D scanning related stuff, feel free to have a look on this collection
CHANGELOG 14.01.2025
Added a short version for the Tree part and improved the seating for magnets in the base part