CAT BACK SCRATCHER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Layer 0.1 mm, 3 loop wall, Printer MK3S, Filament Sunlu PLA, Infill 10%, Nozzle Temp 220° and Plate 65°
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 197
- Wydruki
- 0
- Wyświetlenia
- 968
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
What I like most, what relaxes me is feeling my cats' paws on me, for this reason I designed a back scratcher that has the shape of a cat that with its slightly large paws scratches points of my body not very accessible, so I also designed a fairly rigid rod about 30 cm long.
2 Tips:
1) keep the plate hotter than normal, as the grip surfaces are reduced and the rod reaches the edge of the plate, which is normally less hot, I ended up heating the plate to 70°
2) Glue the parts with cyanoacrylate glue
INFO:
Layer 0.1 mm
3 loop wall
Slicer BambuStudio, Printer MK3S
Filament Sunlu PLA,
Infill 10%, Nozzle Temp 220° and Plate 65°
SUNLU FILAMENTS
SUPPORT ME: