Elecraft KX2 counterpoise magnetic pogo pin covering
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you want quick connect counterpoise on your KX2 use magnetic pogo pin
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 436
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Covering for magnetic pogo pin useable on the earthconnection on your Elecraft KX2
Material
TPU
Layer height
≤0,2 mm
Infill
100% or
Walls
10
Support
None. The model was designed not to require any support material.
- pogo pin https://www.amazon.de/dp/B0BF9BTXJM?ref=ppx_yo2ov_dt_b_fed_asin_title
- 2,6mm plug https://www.reichelt.de/zwerg-stecker-2-6mm-rot-zs-26-rt-p23207.html
- use flexible wire 0,14qmm as counterpoise
- for better connection solder counterpoisewire on middle pin and the two side pins off the magnets
Diese Anleitung ist nach bestem Wissen und Gewissen erstellt und kann Fehler enthalten. Das Nachbauen sollte nur von fachkundigen Personen durchgeführt werden und diese handeln eigenverantwortlich. Für Schäden an Gegenständen oder Personen übernehme ich keine Haftung!
These instructions have been created to the best of our knowledge and belief and may contain errors. The reconstruction should only be carried out by specialists and they act on their own responsibility. I assume no liability for damage to objects or people!
