RC CAR body Peugeot 3008 (2024) 1:12 scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the 1/12 scale (bigger) version. The boot door opens to provide easy access to the battery. Wheelbase is 228mm.
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 208
- Wydruki
- 2
- Wyświetlenia
- 1889
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
18/12/24: The chassis can be found here.
17/12/2024: Added a few pictures with the chassis (to come).
25/11/2024:
The new V3 release is still (almost) glue less but now, you don't need paint either…
All the black parts in the design can now be printed in black separately and mounted with M3 screws (underbody) or glued (windows, side mirrors).
I also improved the grill. The former part was thin with a lot of holes and 3D shaped (curves in all directions). Printing was a real challenge (more like a torture test). So, I unwrapped the part (it's thin and 2D only now) and you will need to bend it to get the 3D shape; put as little glue as possible and use masking tape until the glue cures.
Minor detail: the car now has 2 “fuel” doors (one on each side). I decided this was going to be the hybrid plug-in version!
Assembly instructions (a total of 46 parts):
- Doors: join the body color part of the left doors to the black lower part (1,2) using M3 screws. Repeat for the right side (4,5) Use 20 mm screw for the front doors and 25 mm for the rear. Then glue the “windows” on each side (3, 6).
- Front: join the body color part to the black lower part (19,20) using 5 M3 screws. (use 2x12mm for the arches, 1x20mm in the middle and 2x6mm on the sides)
- Join the front with the doors using 2x12 mm and 2x8 mm M3 screws
- Roof: Assemble the 2 parts of the roof (16,17) with 2 M3 screws + nuts if you wish; then attach the roof to the doors (2M3 x 6mm in the back 2M3 x12mm in the front)
- Add the rear fenders (11,13) with 2 M3 x8 mm screws
- Now mount the rear bumper and rear arches (15) using 6 M3 screws (2x16mm at the rear + 2x12 mm at the arches + 2x8 mm at the doors)
- Then glue the fender “windows” (12,14)
Well now, there is still some gluing to be done (the less glue - the better)
You can glue the boot window to the boot door + the windscreen (10, 18), and the front “vents” (57,58).
Glue the taillights (one part to the rear fenders and the other to the boot door (65,66,67,68). And the mirrors (23,25) and the mirror glasses (24,26) and the roof antenna (8)
Glue the spoiler to the boot door (9,22); the “hinges” (22x2) to the roof.
Glue the claws lights 51,52,53,54,55,56 (claw1 is the outside one, claw 2 in the middle and claw 3 in the inside) Glue the main lights (59,60).
Now glue the 3008 background (61) in the front + the black grill (69); then the front 3008 sign (50). Add the lion (62).
Now on the rear of the car: glue the Peugeot sign (64) and the rear 3008 sign (63).
You should be done with gluing.
Now mount the boot door (spoiler to hinges) using an angle of ca 45 degrees. The hinges snap onto the spoiler.
---------------------------------------------------------------
The 1/12 version should be more usable with bigger motors and the RC stuff I've been using in my other RC vehicle models (Unimog and RCCAR V2) .
It goes with a new chassis that is mainly in mock-up phase. The Mc Pherson strut supension and the winter tire - size 235/55 R19 are some of the subsets that should be part of this new project.
I put the print files in a few color based folders so that it should already give a realistic aspect to the model “off the printer”.
Some of the folders include short 2 color prints so that you can easily print in 2 colors without MMU unit.
PS: I'm adding a few “teaser” pictures of the chassis