Perception Pescador Pilot Steering Handle Assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Longer steering handle for the Pescador Pilot 12.0 kayak.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
I wanted a slightly longer handle with a bit more clearance for my fingers. The intention was to find something that offered a more comfortable feel while being longer than the original handle to improve leverage and handling. Perception Kayaks doesn't have anything off the shelf that I could find so I decided to make my own. Got printer, will make!
I'm very happy with the result. I designed the base with the same profile shape as the original handle but 25mm higher above the gunwale. This provides plenty clearance for fingers and knuckles.
The handle portion is 105mm long and fits comfortably in my hand.
It's advisable to use ABS if your kayak is stored uncovered or in the sun.
My kayak has a permanent cover on when stored so I used PLA instead. It's plenty strong enough but time will tell what effect the salt water will have on it in the long run.
Printed on Bambu A1
Bambu Basic PLA
0.12 resolution
Base and Handle - 25% infill to ensure rigidity but could have gotten away with 20%
Shaft - 50% infill - see note below!
Important Note!
Make sure to print the shaft in the horizontal orientation. Printing in the vertical orientation will weaken the part and could cause it to break along the layer lines while in use.