Trimui model S / Powkiddy A66 d-pad pivot mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trimui Model S / Powkiddy A66 cap to enhance your d-pad experience ! If you are used to Gameboy and other similar…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 195
- Wydruki
- 2
- Wyświetlenia
- 1463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Trimui Model S / Powkiddy A66 cap to enhance your d-pad experience !
If you are used to Gameboy and other similar "rolling" d-pad device, you may have notice false inputs using this device as the d-pad lay on a all-flexible support and the 4 directions are triggered when you press in the center.
This mod use the available room under the flexible d-pad support to lift up the d-pad and flexible support, and the flat surface will bring some more "rolling" experience when moving the thumb from one direction to another by lifting the opposite direction the thumb is pressing.
While designing I looked for a sweet-spot where the device d-pad does not feel stiffer and I think this version is the best I can get.
Place the cap with the flat face on the d-pad flexible plastic, the flexible pin will fit in the middle.
CAUTION : Opening, modifying your device can void your warranty. I will take no responsability if you break or damage something.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.2
Infill:
20%
Filament:
any PLA/PETG
Notes:
I printed with 0,4mm nozzle and 0,2mm layer height with no issues. This is a very tiny part, you should print slowly - 30% of my Prusa I3 MK3S default print speed was perfect.
Category: Hobby