Steampunk Robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A distinguished robot for the more elegant folk
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution
On my P1S the model came out mostly alright but some notable defects:
- The monocle chain broke
- The handle broke
- A finger broke
- had a layer shift near the head
This print took me 3.5 days total at 0.12mm height on a 0.4mm nozzle and used about 750g of filament with all the colour changing. I did have some models in the project to flush to to reduce the total wasted.
IF I were to make it again, I wouldn't use a raft, just move him flat and use a brim, and I'd be more careful with supports. Sadly that monocle is always going to be a difficult part to print okay. Maybe a smaller nozzle and layer height would do it, but 3.5 days is long enough.