1 / 2
1in x 1.5in Key-Hole Washer for Hurricane Shutters/Panels — zdjęcie 1
1 / 2

1in x 1.5in Key-Hole Washer for Hurricane Shutters/Panels

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hurricane washers for shutters/panels if you need for emergency! Best to print with ABS/ASA or any durable composites.

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
72
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Designed these as I ran out of washers for my hurricane shutters, so I designed these! They work just like regular shutter washers. These perfectly withstood the winds from Hurricane Milton printed with PLA @100% infill.

NOTE: ONLY ONE-TIME USE. THIS IS ONLY FOR EMERGENCIES. PRINT WITH SOMETHING STRONG AND HEAT RESISTANT, SUCH AS ABS, ASA, OR ANY COMPOSITES.

SETTINGS:
*100% infill, 3 walls, speed does not really matter (printed these at 500mm/s @30k accel with no durability issues)

Tagi