AA (LR6) Rechargeable Battery Stocker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This stocker can hold 12 AA (LR6) rechargeable batteries.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This stocker can hold 12 AA (LR6) rechargeable batteries.
Batteries that have been charged are stored from the top and taken out from the bottom for proper battery circulation.
All parts do not need support.
The lid can also be printed with a 3D printer. However, better results are obtained if the speed is reduced (40 mm/s or less) and adequate cooling is provided. Set the raft if needed.
The assembly is designed to use a 1x M3 insert nut and a 1x M3 screw, but adhesives can also be used.
recommended material: PETG, ABS, PLA (Except for the lid)