Stream Deck XL Rack Mount Ears/Fins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These fins/ears when paired with the mount at the below link, work as a rack mount for the stream deck xl.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 527
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
https://www.printables.com/model/869619-streamdeck-xl-8040-simrig-mount
The above link is to the printable streamdeck XL mount created by @CrosswindJone_135965
I decided to create ears/fins for the mount he created so that it could mount in a slant rack.
So if you choose to print these fins/ears, you will need his streamdeck mount.
Also, no holes were added to this print. I had to drill holes through the ears/fins to secure everything together AND to mount to a rack. Which isn't too hard.
You will want to get some 1' screws, lock washer and nut. Something not too big or not too small. M4-M6 maybe? Or you could also glue the pieces together, but can't imagine that working too well.
I printed these with PETG, Stone White, Overture.
20-40% infill would work fine