Tensioner adapter / center bolt for Hadley Neumo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows the addition of an M4 or M5 center bolt to Hadley Neumo's rockers.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 280
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed this to add a tensioner to my Hadley Neumo. The adapter clamps onto existing rockers using M3x12 bolts and threaded inserts. The center bolt can either be M4 or M5 with matching threaded inserts.
A more elegant solution would be to remix the rockers themselves, but I already had mine and didn't want to reprint them.
BOM:
- 6x M3x12 DIN 7991 screws
- 6x M3 threaded inserts (same size as for Hadley Neumo)
- 1x M4 OD 6mm (same as for Marci's Mount) or M5 OD 7mm (same as for Hadley Neumo) threaded insert and a matching long bolt
Printing:
For one rocker, print 3 brackets and a face plate that matches your large bolt and insert size.
Assembly:
Insert 2 M3 threaded inserts from the back of each bracket.
Insert the large threaded insert from the back of the face plate.
Clamp the adapter onto the rocker and screw in the large bolt.