Drip tray for Anycubic Kobra Go, Kobra Neo & Kobra 2 Neo 3D printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drip tray for Anycubic Kobra Go, Kobra Neo & Kobra 2 Neo 3D printers
- Ocena
- 4 / 5
- Polubienia
- 42
- Pobrania
- 238
- Wydruki
- 1
- Wyświetlenia
- 1228
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Drip tray for Anycubic Kobra Go, Kobra Neo and Kobra 2 Neo 3D printers. The cut-out at the bottom part allows the filament holder arm of Kobra 2 Neo to be mounted. There are two kind of upper part (DripTrayDish.stl and DripTrayDish2.stl). The second one contains a cutout on the rear and right side of rim for free movement of calibration tool equipped on back of the tray on Kobra 2 Neo.
After printing the bottom part and one of the upper parts, you just have to glue them together.
Inspired by the Anycubic Kobra Go Purge/Drip Tray, but entirely my own design.