Rook 2020 MKII COB Led Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a led strip holder for a Rook 2020 MKII.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
LED Strip Holder for Rook 2020 MKII
Hello,
I have designed a simple LED strip holder for my Rook 2020 MKII.
The individual segments are 70mm long so that they can be printed on a Rook.
Specifications:
- LED Strip: 10mm wide COB 24V LED strip.
- Mounting: The holders are attached to the 2020 profile using M3 x 8 mm screws.
Diffusers:
To prevent the 24V LEDs from being too bright, I created diffusers that are simply pressed into the holder. For best results, I recommend doing a test print. For me, a scaling of 101% worked perfectly, allowing the diffusers to hold without the need for glue.
LED Strip Used:
I chose an LED strip that can be divided every 7 cm:
- Product: FCOB Flexible High Density LED Strip
- Specifications: 1M, 528 LEDs, Natural White, 14W/M, 24V, Dimmable, Moldable
- Link: https://www.amazon.de/dp/B08VJ65WSV?ref=ppx_yo2ov_dt_b_fed_asin_title
Feel free to reach out if you have any questions or need further assistance!