1 / 4
USB Vacuum Pump 50 kPa Holder for 1kg Filament Storage Bag — zdjęcie 1
1 / 4

USB Vacuum Pump 50 kPa Holder for 1kg Filament Storage Bag

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This holder for the common USB pump labelled with "50 kPa" is a base station for use with regular filament rolls.

Ocena
0 / 5
Polubienia
4
Pobrania
20
Wydruki
0
Wyświetlenia
284
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This holder for the common USB vacuum filament bag pump labelled with "50 kPa" is a base station for use with regular filament rolls.

It consists of 3 separate models, the base, the bottom and top part.
The vakuum pump goes between bottom and top part.

This is my updated Version - the tube parts allow now more clearance to the filament roll, also 4 of the bag zippers can be stored on the bottom part.

You can print them without any supports. 
Orientation for bottom and top part: upright.
Please use min 25% infill for the base.

Additionally needed for assembling:

6x M2 (min 6mm) screws (drill 6 top part holes with 2mm if you only want the thread in the bottom part)
2x M5 (max 20mm) flathead screws for the hinge

Tagi