Head Scalp Massager Scratcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Head Massager Scratcher
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 136
- Wydruki
- 2
- Wyświetlenia
- 995
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Maybe the most overengineered-looking head massager in the 3D Print Market? You would be correct. I wanted to design and create a talking point piece that sits in people's homes and makes them ask, “What is that?”
A gadget that would relax you after a hard day's work. This is a device that looks out of this world and would look great in a sci-fi movie. A device that ironically looks more like a torture device than something that relaxes you.
Parts Required
6qty. 4mm x 10mm Metal Dowels. Available on Amazon
Note: You could print pins. I have added them but they cause more friction on the pivot points.
Post print
You can glue the spings in place with a small amount of glue.
Print Settings.
SPRINGS
- SLOW
- NO INFIL
- 0.3 FIRST LAYER HEIGHT FOR BETTER ADHESION. ALL PRINTERS MAY VARY
- 0.1mm LAYER HEIGHT
HANDLE
- 3 WALL THICKNESS
- 15% GYROID INFIL
- 0.2MM LAYER HEIGHT
- TREE SUPPORTS
PRONGS
- 4 WALLS
- 15% GYROID INFIL
- 0.1MM LAYER HEIGHT