Replacement Microwave Handle - ME16K3000AS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle for a Samsung microwave, DE94-02409C SMH1611SE 12-1/8
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
WIP - the handle is maybe 0.2mm too long over it's entire length, and there's not enough margin on the “boltway” parts: I cracked my handle slightly while putting them in. But it fit on line, so I probably will not fix this model, unless the print breaks and I choose to tweak it before reprinting.
Instead of buying this microwave handle - https://www.amazon.com/Microwave-Samsung-Microwaves-DE94-02409C-SMH1611SE/dp/B081SKF3TP - about $11 where I am - I spent an hour in CAD and printed it for about ~$2 worth of filament.
I used PETG, because I thought it would be less likely to crack while installing the stock screws, but PLA would possibly work just fine too.