Ladybug - bicolor - keyring/magnet - no MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fast print of a small ladybug. Three models : keyring, magnet or plain. Choose your colors !
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
2025-04-12 update : the ring (for the keyring version) was a little too thin and prono breaking. It is now larger and should hold better.
2025-01-01 update : I made a second version (V2 directory). Main difference is the legs, which are now fully in the body color (i.e. usually full black). V1 and V2 wings/bodies are not compatible.
The first four images are from the V2 version, the other ones from the V1 version (hint : legs' colours).
Print the body, preferably in black, and the wings in any color you like. Assemble them, and you are done. There is three versions of the body : for use as a keyring, as a magnet (for a 6x2 mm magnet) or plain. Wings are the same for all bodies.
Clearance is a tad tight so you will not need to glue the parts together.
With a 0.2 mm layer, 0.4 nozzle, print times are between 15-20 minutes for each part.
And a HUGE thanks to Rossero for his tutorial : https://www.printables.com/model/1013046-single-extruder-dual-color-tutorial