Anatomical Heart Mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed mold, mainly for silicone or rubber to recreate an anatomical heart.
- Ocena
- 5 / 5
- Polubienia
- 217
- Pobrania
- 469
- Wydruki
- 1
- Wyświetlenia
- 2974
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution
This mold was made mainly with softer and squishier materials in mind, such as silicone or rubber.
The final heart is about 6-7cm tall.
The order of the pieces to fill in with the material start with parts 1 to 4, which are then assembled with part 5. The process of time and vulcanization greatly depends on the material being used. To disassemble, the parts are removed in a descending manner; (5,4,3,2,1) following the arrows that are printed on the sides.
The print need supports, just remember to remove them before using the mold.