1 / 4
[v2] 2 in 1 MK4S / MK4 / CORE ONE Display Knob with Detachable Scraper — zdjęcie 1
1 / 4

[v2] 2 in 1 MK4S / MK4 / CORE ONE Display Knob with Detachable Scraper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Scraper erfectly stored on a size-adapted display knob. Knob is fully functional with and without scraper.

Ocena
0 / 5
Polubienia
16
Pobrania
68
Wydruki
0
Wyświetlenia
601
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I always had trouble finding a good place for my scraper, where it isn't lost and I have it immediately at hand. So I designed an ergonomic scraper for thin layers removal - to be stored on a size-adapted display knob, which is fully functional and the display can be normally used with and without the attached scraper.

It comes in two geometries (knob-like or plain) and with a suitable (adapted/downsized) knob.

There are two sizes with respect to gap between knob and scraper - normal (easily interlocked) and a more tight version (gap of just about 0.05 mm between scraper and knob - for a better feeling while turning. I guess it is also printer dependent how big the gap really is, so you may also play arount by resizing to fit your perfect alignment gap. I like to more tight version.

Print Settings

· prints fine with PLA / 0.2 mm layer heigth. You may improve scraper and choose a layer height of 0.07 mm (or the lowest amount possible) for the first 10+ layers / 1 mm.

Tagi