Polaroid 600/I-Type Cartidge Spring Hold Down Reload Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this to hold down the main spring in the Polaroid film cartridge in addition to holding down the plastic film door.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 469
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Use this to hold down the main spring in the Polaroid film cartridge in addition to holding down the plastic film door and the plastic sheet. User guide attached but basically you insert it, push it to the left, and push forward to get the legs to poke through. Once the legs are poking through push down a little bit and insert the film. If they wont poke through pull up. This is good for the darkslide as well, keeps the little sheet in the rear flat.
Was having trouble reloading some black frames from a I-type cart to a 600 cart so I made this to help get the film started into the pack.
Printed on a Bambu Lab P1S with PETG, used the 0.16 optimal settings 0.4mm nozzle.
Yes, I know the film is the wrong way in the user guide.
-Brilliantmeat46 / CEOKINGCOBRA