RR V-Core 4 Clicky-Clack Fridge Dooor 300mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V-Core 4 Clicky-Clack 3030 Adaptation, 300mm Size Printer, 6mm panels
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 663
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Adjusted original design from 2020 extrusions to 3030 and modified to fit V-Core 300, larger printers will most likely need more hinges, possibly beefed up deisgn. Adapted to 6mm panels.
Notes:
Panels don't require complicated cuts, just some holes.
Existing magnetic mounts repurposed with longer panel_clips.
Doors are easily removable using the existing 2 handles from original RR design, simply lift the door off the hinges.
8x3mm sealing tape was installed on the frame, replaceing the 1mm thick stock tape. 8x1mm was installed on the door interfacing between the door and repurposed front panel. Additionally a strip of 8x1mm tape was installed on the right hand side of the door (clicky handle side) inside to make a better seal along the edge.
Bill of Materials:
FOR 300 SIZE PRINTER, ADJUST THESE FOR LARGER PRINTERS
2x 3030 540mm extrusions
2x 3030 750mm extrusions
Hinges:
3x each printed hinge (hinge_solid hinge_sleeve)
3x 5x50mm dowel pin
6x 5x7x8mm split bushing
6x M5x14 BHCS or SHCS
6x M5x20 BHCS or SHCS
12x 3030 M5 hammer nuts
Clicky-Clacky Door Lock:
1x each printed part (latch hinge_1 hinge_2 handle)
2x M3x8 SHCS
4x M5x25 BHCS or SHCS
2x M4x16 SHCS
2x 5x7x8mm split bushing
2x 5x50mm dowel pin
10x 6x3 magnets
2x 3030 M4 hammer nuts
4x 3030 M5 hammer nuts
Misc:
8x3mm sealing foam tape
8x1mm sealing foam tape
8x 10x4 magnets (extended panel_clips) this is optional