Energy Sword Back Scratcher (Print In Place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wort Wort Wort! This backscratcher allows you to itch just about anywhere, and makes you look cool while doing it.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed in about an hour for the Flash Contest, but I soon realized this is actually a nice back scratcher. Many people (including myself) have overlapping interests in Halo and 3D Printing, so I designed a back scratcher with those two criteria in mind.
The Blade was hand sketched, and I took the liberty of not including that weird bump in the middle of the handle, to improve comfort.
The blade will almost certainly require a brim if you don't have a heated bed and chamber, and supports are optional, as I also designed the scratcher portion with a geometry that does not require supports. However, I would still reccomend using supports, just to ensure that you don't get a spaghetti scratcher.
You can scale the model however you please, if you have a smaller printer, you can always split the model in 2 and print both parts at a larger scale and then join them afterwards.