Articulated Mothman Cryptid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prints in a few parts. No Glue or supports, just snaps together.
- Ocena
- 5 / 5
- Polubienia
- 89
- Pobrania
- 241
- Wydruki
- 3
- Wyświetlenia
- 1241
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
If you like cryptids, then check out my other monster model, the Flatwoods Monster https://www.printables.com/model/1013664-flatwoods-monster-figure-cryptid
This model prints in a few parts. No glue or extra hardware needed for assembly. All parts snap into place with the exception of the “No eyes” model that requires glue for the eyes.
NO Brim or Support needed.
There are two main versions of the body:
- Body with eyes included in model
- Body with eye holes and a separate plate with eyes so they can be printed in red
You can achieve the multi-color wings easily with the Prusa slicer by doing a “change filament at layer” function. Very easy to do. The big wings are designed to have 3 colors, the bottom wings to have 2 but you can do them solid and they also still look pretty good.
INSTRUCTIONS FOR ASSEMBLY.
!!!! The bottom lower small wings MUST be placed FIRST. Also, the wings are not intended to be removable. Once they are snapped into place, they stay. So make sure you put them in the right place. See photo.
This model is 100% my own creation and I give the following permissions:
You can:
Sell printed models (online or locally)
Create remix versions with attribution
Please don't:
Sell the model files
Claim the model as your own
Claim remixes as solely your own