1 / 1
RepRack, CAD included, no logo better printability, smaller hole.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of RepRack which prints better and without logo, also with included fusion 360 model for modifications.
- Ocena
- 4,5 / 5
- Polubienia
- 14
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 472
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (25)Powiązane
Hole diameter is 19mm good for ½" EMT from home depot which is 18mm OD.
Recommend to print in ABS or PETG.
Added also a compliant based clamp for the pipe which worked better for me and holds more tightly without a screw violently pushing the pipe if not needed.