A2 Photo Booth
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple photo booth using A2 paper.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 718
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About
After sharing the original mini photo booth @LachlanA_166535 with my local Warhammer community, a member asked me if there was an option to use A2-sized paper for taking pictures of larger objects. So, I have adapted the original to fit A2-sized paper. In addition, I created a two-part rod that can be taken apart to allow the booth to be stored more easily when it's not in use.
Recommended print settings
Legs
Filament: PETG (I love HS/Rapid PETG)
Nozzle: 0.4mm (but a 0.6mm nozzle would be faster)
Layer height: 0.2-0.3mm
Infill: 25% Gyroid
Walls: 1mm
Supports: Tree
Adhesion: Brim
Print speed: 150mm/s
Rod(s)
Filament: PETG
Nozzle: 0.4mm
Layer height: 0.2mm
Infill: 25% Gyroid
Walls: 1.5-2mm
Supports: None
Adhesion: Brim
Print speed: 100mm/s