PrintABlok StorABloks Modular Organizers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organize your stuff with the modularity and three-dimensional building of PrintABloks
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 133
- Wydruki
- 2
- Wyświetlenia
- 842
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
PrintABlok are interlocking building toys created by the 3D Printing Professor, designed towork well on home 3D Printers. PrintABloks can be built in all 6 directions, allowing for gravity defying building unlike any other building block out there.
But aren't PrintABlok just for toys? Well not any more! These are functional parts that can be used to make modular organizers of any shape and size for all your stuff. Simply measure the stuff you want to store, and find a bin that will hold it. Then snap them all together and StorABlok your stuff.
If you are interested in getting a greater variety of blocks, including articulated blocks and decorative elements to build PrintABlok mechs, you can check premium sets here:
Recommended Printing Tips
While printabloks are design and will print will with any material and most common settings, for best results the following is recommended:
- Layer height 0.16 or lower
- Print connectors in PetG
And that's it. Enjoy.