SkinnySkim Protein Skimmer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small airpump powered protein skimmer that I designed for my pico-marine tank. The airline goes into the base and…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
A small airpump powered protein skimmer that I designed for my pico-marine tank.
The airline goes into the base and into a limewood airstone.
There's a cup to capture the skimate which incorporates an overflow hose barb. The overflow hose barb does not penetrate into the skimate cup, as it's on optional, so just needs drilling through if required. The idea is the overflow can go into a separate container so as to increase the skimate capacity.
There are hose clips on the side of the top and bottom clips for holding the airline. It's skinny enough to fit in the filter chamber at the back of my tank.
There are holes in in the side of the clips which are intended for cable ties if the clips do not hold the tube securely enough.
The top clip can slide up and down the tube to adjust the skimming height.
The cup design is adapted from this: https://www.thingiverse.com/thing:5819194 The hose barb is adapted from this: https://www.thingiverse.com/thing:5993600
Print Settings
Printer Brand:
Sovol
Printer:
SV07
No
Supports:
Yes
0.2
Filament: Elegoo Rapid PETG PETG Natural & Black
Notes:
Supports used for the cup, which I printed with the hose barb closest to the bed.
Supports used for the top clip also.
I used tree supports for easier removal.
Category: Other