Customizable pill box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pill box consisting of two parts. You can rotate it to get pills out.
- Ocena
- 4,714 / 5
- Polubienia
- 34
- Pobrania
- 380
- Wydruki
- 8
- Wyświetlenia
- 1707
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
This is a pill box consisting of two parts. You can rotate it to get pills out.
Main features:
- customizable (SCAD file included)
- No supports needed
- Only printed parts needed (no screws etc)
Printing
Print both the cover and the main body the way they are oriented. If needed sand a bit where the surfaces contact each other. When you are ready press the cover into the main body. This should require some force (tested on PLA). Afterwards both parts are not easily separated anymore.
I recommend printing with a layer height of 0.3 mm.
Customizing
The OpenSCAD file is included to make proper customization possible.
Things that should be easy to change by just touching variables:
- Label on the cover
- Labels inside the trays
- Number of trays
- Diameter and height
Changelog
2022-01-01:
- warn user if the shaft would be too long for the box
- fix splitting of the shaft, when it is too long
2022-12-20:
- By default render mainBody and cover next to each other so that they are immediately printable