1 / 3
MMU Scary Neon Halloween Pumpkin — zdjęcie 1
1 / 3

MMU Scary Neon Halloween Pumpkin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small pumpkin design for Halloween to print using an MMU, AMS or ERCF

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
64
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I recently purchased some Polymaker Neon ABS filament and decided to try print some Halloween decorations.

Here's a simple Jack-o-lantern design I traced in Fusion 360 and applied different colours to. Note that the STL has very small depth differences (0.001mm) for each colour, you'll have to set your slicer to a small edge detection value to apply appropriate colour.

I added a 5mm brim to mine as this was printed using ABS and flipped it upside down to have a decent surface finish. Feel free to use any settings you please. The attached image was printed using:

  • 2 walls
  • 0.24mm layer height
  • 5% gyroid infill
  • 4 top and bottom layers
  • Archimedian chords bottom pattern

 

Tagi