Closet Rod End Cap for Everbilt Closets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick to print press-fit end caps for Everbilt wire closet systems (and others with 3/4" hollow rod)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- GNU General Public License v3.0
We kept being annoyed by clothes hangers sliding off the end of the rods in our closet, so I whipped up these quick press-fit end caps to keep them on. We have an Everbilt wire closet setup from Home Depot which uses ¾" hollow rods, this will probably work with other similar rods. Everbilt sells these end caps but at over $5 for just two this is one of the rare occasions where 3d printing definitely is cheaper!
These dimensions worked for 3 of the 4 rods we have. The fourth rod is smaller than the rest, so I scaled those caps down to 97% in my slicer and it fits perfect. Do a test print and adjust accordingly to fit your printer and rods!