Claw Springy Scratcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This little back scratcher uses a bit of springiness to distribute the forces evenly throughout your back.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I created this back scratcher for Prusa competition. I was thinking about the spring mechanisms to use for distributing forces on uneven back. The end of each “finger” is ended like a human nail, because the best scratches are from someone else :D
I added a .step file so you can remix and change the claws to your specific needs.
*Print the screws and handle parts on flat side and use supports. The screws on each part are cut flat so you can easily remove supports.
Printed on Bambulab A1, 0.4mm nozzle, 0.2mm layer height.