Support Removal Test - No More Stuck Supports!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick test print you can run to modify your Top Z Distance Settings for easier support removal
- Ocena
- 4,943 / 5
- Polubienia
- 1196
- Pobrania
- 11 259
- Wydruki
- 29
- Wyświetlenia
- 26 557
- Oceny
- 35
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
I needed an easy way to test my support settings when it comes to actually removing the supports from your prints. Especially when they are difficult to remove.
This test print is primarily for you to test the different values / results of your Top Z Distance setting in your Slicer Support Settings.
There are individual STL files that correspond to different values you can set or a Blank Option.
There is also a .3mf file with the values preset for you. You can simply swap to your printer profile and carry over the support values.
This model also works great for testing Grid, Snug, Organic & Tree Support options.
Here is the model in action and some of the wild results I was seeing by using different types of PLA
This model was designed in Shapr3D on my iPad