Garden Signs - No Supports Required - Multi-color
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are garden signs for common herbs and a few vegetables.
- Ocena
- 4 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 81
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed these garden signs to be printed on my BambuLab X1C. I highly recommend printing them on a printer that allows for multi-color printing, but you could print them in a single color as well (the lettering obviously won't stand out nearly as much).
My example print is printed in Tinmorry PETG Marble White with Black PETG lettering. As these are used outside, I highly recommend printing them in PETG. I printed mine using 15% Lightning spare infill - this allows them to print faster and consume less material; however, the interior is therefore mostly hollow and does not have much strength - should not matter as you just stab these in the ground and leave them be.
I have included a “Blank” sign so that you can add your own lettering however you see fit in whichever slicer you prefer.
If you found my work useful, stop by my BuyMeACoffee page!
How to print multi-color (Orca Slicer):
I figured that it would take forever to individually color every single letter in the slicer. Therefore, my design allows for a height-range modifier to change filament to color the lettering. See the Orca slicer example picture in the photos to see how the setup should look.
- Import the model onto the build plate.
- Select the filament for the object that you would like to use as the base color.
- Right-click on the object and select “Height Range Modifier”
- Set a height range modifier from 8.0mm to 9.0mm.
- Change the filament for that height range to whatever filament color you would like to use.