1 / 1
Curved Track with radius of 20cm for LEMAX trains
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I planned to build a Winter Wonderland Village on a commode with a depth of 40cm.Because I needed a track with radius…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 373
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
I planned to build a Winter Wonderland Village on a commode with a depth of 40cm. Because I needed a track with radius of 20cm (instead of 30cm), I designed a completely new curved track compatible to the original LEMAX tracks.
I think, 20cm (radius) is the maximum, that a LEMAX train can handle.
See also the tunnel, I have designed and shared too.
Print Settings
Supports:
Yes
Category: Buildings & Structures