40mm fan grill / cover / guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just another design of a fan grill / cover / guard
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 222
- Wydruki
- 3
- Wyświetlenia
- 858
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This needs print support (to reduce additional noise turbulence by having the "grill" further away from the fan blades), I used hybrid trees with 0.2mm interface, and 80% line width on support which helps separate it. followed by a bit of cleaning
Not the easiest print but not impossible either.
I tested in PETG at 0.1mm layer height.
Screw holes are for m3, as that's what I use on my shroud design (ApolloLander on Patreon or basic free model on Printables)
what it looks like in front of a noctua
------
Support me on Patreon !
https://patreon.com/squirrelf3d
or buy me a coffee
https://ko-fi.com/squirrelf3d
https://www.buymeacoffee.com/squirrelf