JEEP Oil Fill Cap Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jeep TJ (Inline 6) Oil cap to bottle cap adapter (DIY no-spill Funnel adapter). Fits other models (see below).
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In my experience, funnels never seem to work just right. They fall over, spill oil, they're either too tall, too short or too skinny to fit right…
To combat this problem, I designed this adapter. Simply cut a standard (at least here in the US) 2-liter bottle in half and screw it in. Voila! You now have a custom funnel to fill up after your oil change!
I also designed it so you can snugly and confidently fit a standard funnel (if you really want too…) None of that falling over and spilling stuff I mentioned earlier…
The specific vehicle this adapter was designed to fit is a 2005 Jeep Wrangler, 4.0L, but the oil cap thread fits more models than just mine. To determine vehicle compatibility with models beyond my '05 Wrangler, I looked up the part number for the Engine Oil Cap.
The following part number is for the Engine Oil Cap:
- MOPAR Part #: 4648831AA (Apparently replaced by Part #: 53010654AA)
After some digging, I found the following list of vehicles that share the same part number:
| CHRYSLER | 300M | 1998-2004 |
| CHRYSLER | CIRRUS | 1997-2000 |
| CHRYSLER | CONCORDE | 1997-2004 |
| CHRYSLER | GRAND VOYAGER | 1999-2000 |
| CHRYSLER | INTREPID | 1997-2004 |
| CHRYSLER | NEON | 1997-2002 |
| CHRYSLER | PT CRUISER | 2001-2005 |
| CHRYSLER | SEBRING | 1997-2005 |
| CHRYSLER | STRATUS | 1997 |
| CHRYSLER | TOWN & COUNTRY | 1999-2004 |
| CHRYSLER | VOYAGER | 1999-2004 |
| DODGE | CARAVAN | 1997-2005 |
| DODGE | DAKOTA | 1997-2003 |
| DODGE | DURANGO | 1998-2003 |
| DODGE | GRAND CARAVAN | 1997-2004 |
| DODGE | INTREPID | 1997-2004 |
| DODGE | NEON | 1997-2004 |
| DODGE | RAM 1500 PICKUP | 1997-2003 |
| DODGE | RAM 2500 PICKUP | 1997-2002 |
| DODGE | RAM 3500 PICKUP | 1997-2002 |
| DODGE | STRATUS | 1997-2005 |
| JEEP | CHEROKEE | 1997-2001 |
| JEEP | GRAND CHEROKEE | 1997-2004 |
| JEEP | LIBERTY | 2002-2004 |
| JEEP | WRANGLER | 1997-2006 |
| PLYMOUTH | BREEZE | 1997-2000 |
| PLYMOUTH | GRAND VOYAGER | 1997-2000 |
| PLYMOUTH | NEON | 1997-2001 |
| PLYMOUTH | PROWLER | 1997 |
| PLYMOUTH | VOYAGER | 1997-2000 |
- This adapter should work with all vehicle models listed above and will most likely work with others beyond those listed, but just in case please make sure to double-check your part number before you print to ensure compatibility with your model.
Printed with:
-TPU (Just my preference - any filament should work - just keep in mind the properties of the liquid you intend to use with the adapter to avoid part failure)
-15% infill
-No Supports if printed in default orientation