Stand for Teng Tools T-handle set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for Teng Tools T-handle metric hex set (2, 2.5, 3, 4, 5, 6, 7, 8, 10, 12)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted a stand for the hex set from teng. The set has 2.5mm to 8 mm – but I also have separate 2, 10 and 12mm wrenches.
The first version has a slightly loose tolerence on the joints between parts - so I uploaded a second copy with a smaller tolerence (0.3). But - since it took a fair amount of time to print and worked with a little CA glue - I didn't reprint myself.
The numbers in the “top” files are separate bodies - for multicolor print. Several slicers say “this looks too small - should I scale it?” - answer “no” :)
You'll need to print one top, two sides and two feet.