1 / 4
6mm glass print bed for Prusa XL
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips for attaching a 6mm glass bed to greatly reduce warping of large prints on the Prusa XL!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 781
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (19)Powiązane
To greatly reduce/eliminating warping of large PLA prints on the Prusa XL I ordered a 364*364*6mm float glass (with chamfered edges). The stl-files are clips for holding the glass in place.
! Be mindful of the initial purging action of the nozzle, so that the nozzle doesn’t collide with the left front clip !
Font-clip printed vertically in PETG and 0.2mm structural preset.
Back-bar printed in PETG and 0.2mm structural preset.