1 / 2
Starlink Gen 3 Router with Power Supply Wall Mount — zdjęcie 1
1 / 2

Starlink Gen 3 Router with Power Supply Wall Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Starlink mounting bracket seamlessly combining the Gen 3 router and power supply into a compact organized unit.

Ocena
5 / 5
Polubienia
218
Pobrania
3270
Wydruki
13
Wyświetlenia
8431
Oceny
13

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Suggested Build Instructions:

Material - Atomic Filament Carbon Fiber PETG (Ideal for UV Resistance and Ductility)

https://atomicfilament.com/products/carbon-fiber-black-petg-pro

Other materials: PETG, ASA, ASA-CF, ABS, PLA (PLA may be too brittle for spring clamps)

Nozzle: 0.50mm

Bed Temp: 85c

Hotend: 255c

Extrusion Multiplier: 0.90

Layer Height: 0.20mm

Perimiters: 4

Infill: 25%, Rectilinear

Support: Paint-on, Triangles - Under Power Supply Tab, Wire Channel, and Router Catchment

 

 

Scaling Notes:

Every 3D printer is slightly different.  The Starlink power supply and router have an angled surface which is used to contain the components within the mount.  The fit should be concise, not overly loose or tight.  very subjective ;-)

On my printer I placed the model width-wise in X.  To adjust fitment for the power supply you would adjust slightly in Y ONLY (increments of 0.25mm) .  To adjust fitment for the router, you would adjust slightly in Z ONLY (increments of 0.25mm).  If the power supply catchment tab is out of place, you would adjust X ONLY (very unlikely)

Tagi