1 / 2
Stunt Car
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Spare car for ZIG-ZAG race track
Width: 31.5mm
Length: 41mm
Height: 14mm
Designed for maximum possible weight - necessary for good riding throug the track
- Print with 98% infill - max weight without risk of overextrusion problems
- Best result with PLA printed with maximum allowed temp by filament manufacturer (for example 240°C) to have shiny surface for less possible friction of axis
- Chasis and wheel with shaft - set seam to aligned - there are V-groves to hide seam away of circullar surface
- very tight tolerances wheel to axis - need to check after print if the wheels will be pressed and hold by itself on place or it will need a drop of super glue
- with-axis-v2 and wheel-only-v2 - print each model 2x