1 / 7
Sliding Number Puzzles - (print in place 15 puzzle) — zdjęcie 1
1 / 7

Sliding Number Puzzles - (print in place 15 puzzle)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is my 3D-printed version of the classic sliding 15 puzzle.

Ocena
4,863 / 5
Polubienia
803
Pobrania
6779
Wydruki
123
Wyświetlenia
15 030
Oceny
102

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is my 3D-printed version of the classic sliding 15 puzzle. I also included a smaller 3x3 8-piece puzzle along with a larger 5x5 24-piece puzzle.

These are fully print in place, so the pieces all interlock straight off the printer. This print-in-place design eliminates the backing seen on other variations, so these work best when used on a flat surface.

The puzzles work best with a smaller layer height (I normally use 0.15mm). Otherwise, these should work with your normal settings.

 

 

I sell these on my Etsy shop, but they are free for makers to print and enjoy themselves!

Thanks!

Tagi