1 / 5
Throw In Magnetic Battery Holder / for 1:10 Scale Crawler Trunk / Update 15.08.2026 - New Sice — zdjęcie 1
1 / 5

Throw In Magnetic Battery Holder / for 1:10 Scale Crawler Trunk / Update 15.08.2026 - New Sice

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

No fiddling with hardbody screws. Put the battery in the holder and throw it in the trunk. Magnets place it themselves.

Ocena
0 / 5
Polubienia
6
Pobrania
26
Wydruki
0
Wyświetlenia
530
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

I was annoyed by fiddling with the body screws. That's why I put the battery in the holder, which (thanks to the magnets) finds its way alone when you throw it in the trunk

  • 100x40mm inside / most Shorty Lipo Packs fit / V2 has 88x44mm space inside

  • Needs 10 pieces of 15x3mm neodymium magnets

  • 5 in the bottom part, 5x in the top part (if it holds too tight, simply leave out magnets)

  • Magnets sit tight in the holes, no glue needed

  • M3 countersunk screws are used for the lower part